Accurate measurement
　　Tools required for measurement:
    ① Measuring tap
    ② 550mm triangle
    ③ 250mm steel ruler
    ④ Wooden backup plates with four right angles, whose length is no less than 1000mm and width is no less than 300mm.
　　 Supporting tools for measurement: cardpanels, wood panels and wood sticks.

Measurement preparations:
　　To understand the shape of sheets to be processed and determine tools required for measurement as per the cabinet drawings provided by customers or through phone inquiry.
　　With regard to counter tops, it is generally the best way to make measurement after the fulfillment of cabinet installation.

Easy to fabricate
　　 The fabrication of Polystone is the same as that of ordinary woodwork. Skilled carpenters can become familiar with it only after short-time guidance.
　　
Easy to fabricate :
　　The fabrication of Polystone is the same as that of ordinary woodwork. Skilled carpenters can become familiar with it only after short-time guidance.


1．Cutting

2．Drilling

3．Trimming

4．Bonding

5．Sanding

6．Polishing

　　Cutting: Straight-line or curve cutting can be completed instantly with cutting machines.
　　Drilling: The drilling at positions of faucets, pipelines, sinks, bowls and inserted furnaces can be completed by using electric drills and cutting machines.
　　Trimming: All sidelines can be realized by using woodwork trimming machines. It is only required to change various knives and edgings.
　　Bonding: The bonding of panels, veneers, backsplashes, bowls and sinks can be realized by using Polystone adhesives. Adhesives in the same color can make joints imperceptible.
　　Sanding: Sanding can be realized by using sanding machines or through manual sanding. Little flaws can be eliminated by sanding with waterproof abrasive paper No. 100-150, No. 400-600 and No. 1000-1200 step by step.
　　Polishing: To polish surface evenly and thoroughly and wax them with polishing machines so as to make them high-gloss.
　　
　　Eight steps of installation

1．Dimension check

2． Amendment

3． Drilling

4． Leveling

5． Jointing

6． Fixing

7． Sanding

8．Polishing
　　　

 

 Dimension check: It is required to check the dimensions of products with site dimensions again before installation to ensure conformity.
　　 Amendment: To amend the parts where there are deviations compared with the site to satisfy installation requirements.
　　Drilling: To drill and install faucets, drainage hoses and other accessories at the places required.
　　Leveling: To have a test installation of counter tops to see whether every part is horizontal and whether vertical bondings align. To level them when required.
　　Jointing: Jointing is the most important step of installation, so more care should be taken.
　　 ■ The jointing of bowls and sinks should be conducted in workshops to minimize site jointing work.
　　 ■ Dimension and position check should be conducted before jointing.
　　 ■ Joints must be smooth so carpenter's planes may be used for planing joints.
　　 ■ Joints should be positioned at unconspicuous places.
　　 ■ Joints should be positioned in straight lines instead of at corners so as to facilitate operation.
　　 ■ To apply glue evenly on both sides of joints or fill glue in seams so as to make seam sealed.
　　 ■ To clamp both sides of joints with clips or jam them with wedges.
　　 ■ Never shine or touch Polystone when glue is wet.
　　 Fixing: To apply glass cement on supporting cabinets or racks for fixing counter tops.
　　 Sanding: Site sanding should be limited to joints. Relative objects should be covered before sanding for isolating dust. Sanding should be conducted step by step with the sand paper from coarse to fine.
　　 Polishing: To wax and polish the products with polishing machines after sanding. Polishing degree may be determined by customers.